Change or rekey · Toronto
Smart Lock Installation
There are four copies of the front-door key floating around: one with the cleaner, one with a neighbour, one on a hook at your parents' place, and one you honestly cannot account for.
In plain words
A smart lock is only half installed when the screws are tight; the other half is the account behind it. During the visit the administrator account is created by you, on your own phone and email, so nobody else holds the keys to the settings. Factory codes are deleted, a code is made for each person who needs one, and the auto-lock timing, sounds and alerts are set to suit the household. If the lock joins Wi-Fi or a hub, that connection is made and tested. The locksmith walks you through adding and removing users so future changes are yours to make, and keeps no codes afterwards.
How the visit goesYou have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.
Smart Lock Installation
How the visit goes
The other doors and the keys that stay
A smart lock rarely arrives alone; the back door, the garage entry and the side door still have keys, and the plan should include them. The locksmith asks which doors should share the new arrangement, whether the remaining mechanical locks share a keyway compatible with the smart lock's override so they can be rekeyed to one key, and where that key will live once the family stops carrying keys daily. If the household is dropping keys altogether, a lockbox for the override key or a second keypad becomes part of the conversation. Sorting this out at the start means the whole house ends up on one coherent system rather than a smart front door and a drawer of mismatched keys.
Power up and teach the lock its door
Once the hardware is tight, the lock gets the batteries its maker specifies, all fresh and all the same type, since mixing old and new cells shortens the life of the set. Most models then run a short calibration in which the motor learns which way is locked, how far the bolt travels and where it meets resistance. The locksmith runs this exactly as that model's instructions direct, door open or closed depending on the maker, then cycles it several times from the keypad and the thumb-turn while listening for a motor that strains. If the lock has a door-position sensor or a magnet to fit on the frame, it is placed and confirmed at this stage.
Keeping the lock healthy through the seasons
A smart lock asks for a little seasonal attention and rewards it. In spring and autumn, check that the bolt still glides with the door closed and no hand on it; a door that has swollen or dropped starts to strain the motor before it stops working, and a hinge screw or strike adjustment then is far easier than a call later. Keep the keypad free of ice and grit, wipe salt film off the exterior in winter, and use only a dry lubricant on the override cylinder, never oil. Accept firmware updates when the app offers them. If the lock starts to sound laboured, that is its way of asking for a look.
Smart Lock Installation
In the van
Dry PTFE lubricant
Adjustable-backset bolt and faceplate
Door-position sensor magnet
Hinge shims and long hinge screws
Thick-door extension kit
Smart Lock Installation
What affects the quote
Network setup
Joining the lock to Wi-Fi, adding a bridge because the signal at the door is weak, or pairing with an existing hub is setup time and sometimes an extra device, and appears in the quote as such.
Supplying the lock yourself
If you have already bought a lock, the quote covers fitting and setup only, with a note on whether the chosen model suits your door; if the locksmith supplies it, the hardware is listed alongside.
Retrofit versus full replacement
An interior-only unit that turns your existing deadbolt involves less door work than a complete new deadbolt with a keypad outside, and the two are quoted differently in both hardware and time.
What to have ready
- Roughly how thick is the door?
- Is there a storm door in front of it?
- How strong is the Wi-Fi signal when you stand at that door?
Smart Lock Installation: questions
QuestionsHow does a smart lock cope with our winters?
Well, with a little planning. Cold reduces battery capacity, so the locksmith fits fresh cells of the type the maker specifies and points you to the low-battery alert, and a new set before the first hard frost is a good habit. The bolt is aligned with clearance so a door that swells or shifts with freeze and thaw does not strain the motor. Keep ice off the keypad, and use lock de-icer only in the key cylinder, never on the touch surface.
Will summer heat behind my storm door damage the lock?
It can stress it, and it is one of the first things the locksmith looks at. A full-glass storm door on a south- or west-facing entrance can push the air between the doors well above what electronics are rated for on a hot afternoon. The usual answers are a storm door with a vent or screen, swapping to the screen panel for summer, or a model whose maker rates it for that exposure. With that handled, the lock is fine.
Do I still get a key?
In most cases, yes. The majority of keypad deadbolts keep a conventional cylinder behind or beside the keypad, and the locksmith rekeys it during the visit so a fresh key works and the old one is retired. A few designs have no keyway at all and rely on the keypad plus an emergency power contact instead. Which you prefer is part of choosing the model, and either way the fallback route is tested before the locksmith leaves.
Related services
- Deadbolt InstallationYou bought a keypad deadbolt online and pulled the old one off, only to find the hole in the door is a different size and the bolt latch sits at a backset the new kit does not list.
- Lock Replacement & UpgradeThe brass handleset has gone blotchy and green where the winter salt reaches it, and the coating on the deadbolt is lifting in flakes.
- Vintage Mortise Lock ServiceThe brass knob on the front door of your century home turns, but nothing happens on the other side.